Publications internationales

2024
Souad Ayadi, Ali Hadji and Kaleli Hakan . (2024), EFFECT OF HEAT TREATMENT TEMPERATURE ON THE MICROSTRUCTURE, WEAR AND FRICTION OF Ni–Nb–V ALLOYED MANGANESE STEEL. international Journal of Metalcastinghttps://doi.org/10.1007/s40962-024-01363-z
2020
Souad Ayadi and Ali Hadji. (2020), EFFECT OF CHEMICAL COMPOSITION AND HEAT TREATMENTS ON THE MICROSTRUCTURE AND WEAR BEHAVIOR OF MANGANESE STEEL. International Journal of Metalcastinghttps://doi.org/10.1007/s40962-020-00479-2
Souad Ayadi, Ali Hadji, Kaleli Hakan and Demirtas Selman . (2020), Microstructure and wear behavior of a Cr-Mo-Nb alloyed manganese steel. Journal of Materials Research and Technologyhttps://doi.org/10.1016/j.jmrt.2020.08.048
2019
Souad Ayadi and Ali Hadji . (2019), Effect of Heat Treatments on the Microstructure and Wear Resistance of a Modified Hadfield Steel. Metallophysics and Advanced Technologieshttps://mfint.imp.kiev.ua/en/abstract/v41/i05/0607.html

Communications internationales

2024
Souad Ayadi and Ali Hadji. (2024), Wear Behavior of Nb-V-Cr Alloyed High Manganese Steel. The 3rd edition of the international conference on materials science and engineering and their impact on the environment -ICMSE’2024, 29-30 May 2024, sidi bel Abes, Algeria.
AYADI Souad and LEMBOUB Samia. (2024), Effect of Heat Treatment on the Microstructure and Mechanical Properties of AlSi10Mg alloy. The 1st International Conference of Materials Engineering and Renewable Energy (ICMRE), November 9- 11, 2024. https://fstech.univ-guelma.dz/en/node/282
2023
BOULIFA Mohamed Iliasse, Hadi Ali et AYADI Souad. (2023), Alloying elements contribution to the improvement of the mechanical properties and wear resistance of spheroidal graphite cast iron. The second International Conference on Materials, Energy and Environement (MEE’2023), 23-24 Octobre 2023, Université Echahid Hamma Lakhder-El Oued, Algérie.http://www.univ-eloued.dz/mme’2023/
2019
Souad Ayadi and Ali Hadji. (2019), Wear Behavior of a Modified High-Manganese Steel. 6èmes Journées Scientifiques Franco-Maghrébines Caractérisation des Matériaux Complexes (6è JSFM-CMC 2019), 17-18 November 2019 – Annaba, Algeria. http://www.jsfm-cmc.com/Inscription.html
Souad Ayadi and Ali Hadji. (2019), Tribological Properties of a Modified High-Manganese Steel. 5th International Conference on Advances in Mechanical Engineering (ICAME2019), 17-19 Décembre 2019, University Technique of Yildiz -Istanbul, Turkey. http://icame2019conference.com/
Souad Ayadi and Ali Hadji. (2019), Heat Treatment of a New Grade of Hadfield Steel . 5th International Conference on Advances in Mechanical Engineering (ICAME2019), 17-19 December 2019, University Technique of Yildiz -Istanbul, Turkey. http://icame2019conference.com/
2018
AYADI Souad and HADJI Ali. (2018), Influence des traitements thermiques sur la microstructure et la dureté d’un acier destiné au broyage . International Symposium on Materials Chemistry (ISYMC 2018), 19-20 Mars 2018, Université de M’Hamed Bougera-Boumerdès, Algérie. https://isymc2018.wixsite.com/umbb
Souad Ayadi and Ali Hadji. (2018), Development of a wear-resistant steel . International Conference on Materials Science (ICMS 2018), 12- 14 Septembre 2018, Université de Ferhat Abbas-Setif1, Algérie. http://www.univ-setif.dz/OCS/ICMS2018/ICMS
Souad Ayadi and Ali Hadji. (2018), Effet des éléments d’addition et des traitements thermiques sur le changement microstructural d’un acier Hadfield . International Conference on Nanomaterials and Renewable Energies (ICNRE 2018), 15-17 Octobre 2018, Université 20 Août 1955-Skikda, Algérie.http://st-conf.univ-skikda.dz/incre2018/index.php
Souad Ayadi and Ali Hadji. (2018), Influence du traitement thermique sur la transformation martensitique et le comportement à l’usure d’un acier au manganèse . International Symposium On Mecatronics And Renewable Energies (ISMRE’2018), 10-11 Décembre 2018, Université Echahid Hamma Lakhder-El Oued, Algérie.http://www.univ-eloued.dz/ismre18/
Ali HADI and Souad AYADI. (2018), Effect of Chemical Composition on Martensitic Transformation and Abrasive Wear Resistance of Hadfield Steel. International Symposium On Mecatronics And Renewable Energies (ISMRE’2018), 10-11 Décembre 2018, Université Echahid Hamma Lakhder-El Oued, Algérie.http://www.univ-eloued.dz/ismre18/
Ali HADI and Souad AYADI. (2018), Effect of Heat Treatments on Change Microstructure and Hardness of Cr-Ni Alloyed Hadfield Steel . 4th International Conference on Advances in Mechanical Engineering (ICAME2018), 19-21 Décembre 2018, Université Technique de Yildiz -Istanbul, Turquie.http://icame2018conference.com/index.php
Souad Ayadi and Ali Hadji. (2018), Effect of Vanadium and Molybdenum on Wear resistance of High Manganese Steel. 4th International Conference on Advances in Mechanical Engineering (ICAME2018) , 19-21 Décembre 2018, Université Technique de Yildiz-Istanbul, Turquie.http://icame2018conference.com/index.php

Communications nationales

2024
AYADI Souad and Mohammed Iliasse Boulifa. (2024), Corrosion Behavior of NiNbCr Ductile Cast Iron. The Second National Conference Of Materials Sciences And Renewable Energy, October 26th and 27th ,2024, Relizane, Algeria. https://univ-relizane.dz/fst/
AYADI Souad and Mohammed Iliasse Boulifa. (2024), Effect of Heat treatment on the Corrosion Behavior of Ductile Cast Iron. 3ème Séminaire National sur la Chimie Appliquée, 14 novembre 2024. https://www.univ-guelma.dz
2023
AYADI Souad, HADJI Ali, KALELI Hakan and DEMIRTAS Selman. (2023), Microstructure and Tribological Properties of a Nb-V Alloyed Manganese Steel. The First National Conference Of Materials Sciences And Renewable Energy CMSRE23 on November 22-23, 2023 in Relizane, Algeria. https://univ-relizane.dz/
2018
Souad Ayadi and Ali Hadji. (2018), Durcissement par précipitation d’un acier au manganèse. Journée Nationale-Etude des Matériaux : Elaboration et Modélisation, 13 Décembre 2018, Université 8 Mai 1945-Guelma, Algérie. http://fmism.univ-guelma.dz/http://fmism.univ-guelma.dz/