Publications internationales

2020
(2020), Comparative Study of two control strategies proportional integral and fuzzy logic for the control of a doubly fed induction generator dedicated to a wind application
(2020), Comparative Study of two control strategies proportional integral and fuzzy logic for the control of a doubly fed induction generator dedicated to a wind applicationInternational Journal of Power Electronics and Drive System (IJPEDS) Vol. 11, No. 1, March 2020, pp. 263~274 ISSN: 2088-8694, DOI: 10.11591/ijped
2019
(2019), Accelerated computation of the wake of a horizontal axis wind turbine in unsteady operation using the vortex approach. Appl. J. Envir. Eng. Sci. 5 N°1(2019) 24-41

Résumé: This article aims to propose an approach for modeling the unsteady behavior of a horizontal axis wind turbine. The unsteady operation is supposed to be the consequence of a rapid variation of the pitch angle of the blades or the load of the wind turbine. The used vortex model has a limited number of elements, in order to reduce the time and volume of the required numerical computation. The wake behind the wind turbine is considered to be composed of small series of vortex rings in the near wake and one semi-infinite vortex cylinder in the far wake. This model is coupled with a blade element method, which allows fast determination of the momentum and power of the wind turbine. Field measurements of the Tjaereborg wind turbine are used as a reference for the validation of the proposed model. The results obtained with the numerical simulation show a good agreement with the measured experimental data. Keywords: : Free wake; Induced velocity ; Root vortex ; Semi-infinite vortex cylinder; Tip vortex; Vortex ring ; Wind turbine wake..

2018
(2018), Comparative study of wind speed extrapolation methods for sites with different roughness Int. J. Power and Energy Conversion, Vol. 9, No. 3, 2018
2017
(2017), Modeling and simulation of wind data for a prediction of the electrical energy from wind farms: case of a site in the region of Annaba Appl. J. Envir. Eng. Sci. 3 N°2(2017) 159-168
(2017), Computationally inexpensive free vortex method to obtain vortex core position in the wake of horizontal axix wind turbine International Journal of Fluid Mechanics Research 44(5): 1-17(2017)
2016
(2016), Single and Twisted Blades Digital Simulation and Dynamic Analysis International Journal of Electronics Communication and Computer Engineering Volume 7, Issue 2, ISSN (Online): 2249–071X, ISSN (Print): 2278–4209
(2016), Modeling of station of pumpage by variable speed Mechanics,Materials Science &Engineering july ISSN 2412-5954
2014
(2014), Assessment of the Wind Field in the East Coast Algerian Regions for the Installation of Wind Farms Journal of Energy and Power Engineering 8 (2014) pp 487-494 ISSN:1934-8975
(2014), Assessment wind fields in the region of Annaba east Algeria with an aerodynamic analysis for installation a small wind turbine. MECHANIKA. 2014 Volume 20(6): 582-589
(2014), Evaluation of the adequacy of the wind speed extrapolation laws for two different roughness meteorological sites American Journal of Applied Sciences 11 (4): 570-583, 2014 ISSN: 1546-9239
2013
(2013), Modeling and simulation of wind turbine conversion system excited with different profiles of wind Journal of Electrical and Control Engineering Vol 3 N°3 2013 pp 20-24
(2013), Establishment of the wind speed model for the installation of wind turbines in the Algerian offshore Journal of Electrical and Control Engineering Vol 3 N°3 2013 pp 13-19
2011
(2011), Using design of experiments to evaluate the partial discharges evolution. Journal of Electrical Engineering. Volume 11 / 2011 - Edition Journal of Electrical Engineering
2010
(2010), Factors influencing slurry rheology Volume 2010,Issue 7. pp 30-32 . Wold pumps Ed Elsevier Volume 2010, Issue 7. p30-32 Site: www.worldpumps.com
(2010), Influence of wind speed on the conversion system of a low power wind turbine Volume10 N°4 2010. Journal of Electrical Engineering Volume10 N°4 2010 www.jee.ro
(2010), Influence of wind speed on the conversion system of a low power wind turbine Volume10 N°4 2010. Journal of Electrical Engineering Volume10 N°4 2010 www.jee.ro
(2010), Influence of wind speed on the conversion system of a low power wind turbine Volume10 N°4 2010 Journal of Electrical Engineering
(2010), Influence of wind speed on the conversion system of a low power wind turbine. Journal of Electrical Engineering : Volume 10 / 2010 - Edition : 4 Journal of Electrical Engineering
2009
(2009), Mixture type dictates pump choice Volume 2009,Issue 510. pp 32-34 . Wold pumps Ed Elsevier Volume 2009, Issue 510 Site: www.worldpumps.com
(2009), Simulation of the thermohydraulics parameters in vaporizer tubes by Kandliker model.pp528-531 Volume 2. 2009 CONV-09
2008
(2008), Management of maintenance by vibratory analysis: Selective maintenance, case study: cooling pump. Tomul LIV (LVIII) Fasc3-4 pp 77-87. 2008 Buletinul Institutului Politehnic
2007
(2007), Détermination of centrifugal pump characteristic in solid liquid mixture. Vol 4 N°4 2007 pp 1-6.World journal of engineering
(2007), Management of maintenance by vibratory analysis case: a planetary reducer. Vol 4 N°1 2007 pp 22-27 World journal of engineering
(2007), Assessment oft he two phase heat transfer coefficients in the vaporizer tubes by several models Vol 8 N°2(20) pp 109-116 july 2007 Rezultatele Cercetarilor Noastre Technice
(2007), Failings analysis oft he dynamic boiler E.V.T MITTAL Steel Annaba Vol 1 N°5 September 2007 pp 572-578 International Review of Mechanical Engineering
(2007), Optimal experimental parametrage of rotary drilling. Volume 6 Issue 4 pp 520-523 2007 Asian Journal of Information Technology. 6(4) 520-523 2007 ISSN: 1682- 3915
(2007), Friction factor in the mine airways of different wall support Vomume2 Issue 1 pp 214-218.2007 Journal of engineering & applied sciences.2 (1) 214-218.2007
(2007), Influence of Solid Particles on Centrifugal Pump Characteristics. Journal of Engineering and Applied Sciences, 2: 244-247.
2005
(2005), Management de la maintenance conditionnelle. Etude de cas : Analyse et diagnostic d’un ventilateur de tirage par analyse vibratoire. Tomul LI LV Fasc.3-4 2005 pp 103-111 Buletinul Institutului Politehnic

Communications internationales

2019
(2019), Chebel.A.Benretem,Dobrev.I,Barkat.I Fuzzy control of DFIG dedicated to a wind turbine 5th conference on CIMSI’2019 Nov 18-19 Skikda Algeria
(2019), Barkat.I, A.Benretem,F.Massouh, I.Meghlaoui,Chebel.A Analyse de l’aérodynamique d’éolienne à axe horizontal à l’aide de la méthode tourbillonnaire 5th conference on CIMSI’2019 Nov 18-19 Skikda Algeria
(2019), S.Slimani,R.Hamdaoui, A.Benretem L.Farah Le retentissement du fonctionnement des éoliennes sur la santé de l’homme 5th conference on CIMSI’2019 Nov 18-19 Skikda Algeria
(2019), S.Sminani,Farah.L, A.Benretem , R.Hamdaoui Etude expérimentale de l’impact environnemental des éoliennes sur la santé de l’hommeCISMI’2019 11-12 Décembre 2019 Marrakech Maroc
2018
(2018), Analysis aerodynamics of horizontal axis wind turbine using the vortx method. International seminar in industrial engineering and applied mathematics 23-24 October 2018 SKIKDA Algérie
(2018), Modeling the forces applied to horizontal axis wind turbine rotors using the vortex method 3eme International conference on electromechanical engineering 21-22 November SKIKDA 2018
(2018), Accelerated computation of the wave of a horizontal axis wind turbine in un-steady operation using the vortex approach 4th International conference on advances in mechanical engineering Instambul 2018 December 19-21 2018 TURKEY
(2018), Impact of the operation of wind turbines on human health 6 th International Renewable and Sustainable Energy Conference December 5-8 Rabat 2018 Morocco
2017
(2017), Computationally inexpensive free wake vortex model to validate vortex core positions in flow through a horizontal axix wind turbine 3 eme Conférence Internationale de Mécanique 26-27 Avril Annaba Algérie 2017
(2017), Modélisation des efforts appliqués aux rotors d’éoliennes à axe horizontal 4eme Conférence Internationale sur la Maintenance et la Sécurité Industrielle CIMSI ‘2017 Skikda Algérie
(2017), Modelisation d'une chaine de conversion éolienne et l'utilisation de la logique floue pour la commande d'une MADA 4 eme Conférence Internationale sur la maintenance et la Securité Industrielle CIMSI 2017 SKIKDA 20-21 November Algérie
(2017), Controleur Neuro-Flou pour la poursuite du point de puissance maximum d'un systeme photovoltaique 3eme Conférence de Mécanique 26-27 Avril Annaba 2017
2016
(2016), Optimisation of the energy of a solar system by controlling a two axis tracker International Renewable and sustainable Energy Conference (IRSEC’16) November 14-17 Marrakech - Morroco
2015
(2015), L’effet de la forme de la pale sur la puissance de l’éolien Conférence Internationale sur la Maintenance et la Sécurité Industrielle CIMSI'2015 Skikda 09 et 10 Novembre 2015
(2015), Simulation numérique et analyse aérodynamique de deux types de pale simple et vrillé Conférence Internationale sur la Maintenance et la Sécurité Industrielle CIMSI'2015 Skikda 09 et 10 Novembre 2015
2010
(2010), Modélisation et simulation d’une éolienne de petite puissance à axe horizontal 4eeme Congres International Francophone de Mécanique Avancée. Du 19 au 21 Avril Alep Syrie 2010
(2010), Energy conservation with centrifugal pumps using variable speed drives 7eme Conférence Internationale sur la science des Matériaux (CSM7) du 20-22 Mai Beyrouth Liban 2010
2009
(2009), Influence of conveyed mixtures kind on centrifugal pumps selection 9eme Congres de Mécanique- du 21 au 24 Avril Marrakech Maroc 2009
(2009), Simulation of the Thermohydraulics Parameters in Vaporizer Tubes by Kandlikar Model International Symposium on Convective Heat and Mass Transfer in Sustainable Energy CONV-09 26April – May 01Hammamet.Tunisia 2009
(2009), La thermographie infrarouge au service de la maintenance prédictive. Application sur la chaudière JB50 FERTIAL Annaba Séminaire International sur les technologies Mécaniques. les 05 et 06 Décembre Tlemcen 2009 Algérie
(2009), Modelling and simulation chain of small horizontal axis wind power 3rd International Conference on Electrical Engineering Design and Technologies ICEEDT’09 Oct 31 – Nov 2 Sousse Tunisia 2009
2008
(2008), Détection des défauts dans une machine tournante Conférence Internationale : Maitrise et management des risques Industriels 24-25 Avril Oujda Maroc 2008
(2008), Modélisation de l’écoulement lors de l’ébullition dans les tubes vaporisateurs Conférence Internationale : Maitrise et management des risques Industriels 24-25 Avril Oujda Maroc 2008
(2008), Modelling of station pumping by variable speed.5eme Congress of Scientific Research Outlook in the Arab World 26-30 October Fez. Maroc 2008
2005
(2005), Etude et diagnostic d’un ventilateur de tirage par analyse vibratoire (Centrale électrique de Jijel )Séminaire International sur la maintenance 12/13 Mai Oujda. Maroc 2005
(2005), Détermination de la hauteur d’une pompe centrifuge à mélange liquide- solide Séminaire International sur les Systèmes Electromécaniques, Université Badji Mokhtar 22-23 novembre 2005 Annaba. Algérie
(2005), Qualité d’équilibrage sur site des rotors des machines tournantes :cas d’un ventilateur Séminaire International sur les Systèmes Electromécaniques, Université Badji Mokhtar 22-23 novembre 2005.Annaba Algérie
(2005), Etude et analyse de la pollution d’un fluide hydraulique Séminaire International sur les Systèmes Electromécaniques, Université Badji Mokhtar 22-23 Novembre 2005. Annaba Algérie
2004
(2004), Fiabilité des pompes centrifuges à mélange liquide-solide en exploitation.Symposium International Qualité et Maintenance au service de l’entreprise QUALIMA’01 21-22 Novembre Tlemcen 2004
(2004), Mise en place d’une carte de contrôle des procèdes continus. Symposium International Qualité et Maintenance au service de l’entreprise QUALIMA’01 21-22 Novembre Tlemcen 2004

Communications nationales

2010
(2010), Dépistage et diagnostic du comportement vibratoire du turbocompresseur JI/80-5 Unité Centrale à oxygène MITTAL Steel Annaba Journées d études nationales de mécanique 2010. 20-21 Octobre Khenchela 2010.
(2010), Modélisation analytique d’un système de pompage photovoltaïque Première Conférence Nationale sur l’Electrotechnique CNE’01 23-24 Novembre .Souk-Ahras 2010
2009
(2009), Amélioration de la sureté de fonctionnement du compresseur 103j Unité NH3 Somias Annaba The first Maghrebian Conference April 28-29 Souk-Ahras 2009
(2009), Une maintenance ciblée c’est une maintenance maitrisée. Cas d’une pompe de refroidissement The first Maghrebian Conference April 28-29 Souk-Ahras 2009
(2009), Etude du comportement dynamique d’un film d’huile dans un roulement à billes The first Maghrebian Conference April 28-29 Souk-Ahras 2009
(2009), Energy cost saving with variable speed centrifugal pumps 1er Séminaire International sur les Mines au Service du Développement Durable 08-09 Décembre Tébessa 2009
2007
(2007), Adaptation de la défaillance au progrès technologique Journée d’Etude Scientifique et Industrielle sur la Maintenance JOSIM 2007 12 Mars Oran 2007
(2007), Amélioration de l’efficacité énergétique des pompes centrifuges 1er Séminaire National sur la Maintenance et la Sécurité Industrielle. Du 11-12 Mars Skikda 2007
(2007), Etude comparative entre modèles du régime saturé et application sur la chaudière 40 Sonelgaz Annaba 1er Séminaire National sur la Maintenance et la Sécurité Industrielle. Du 11-12 Mars Skikda 2007
2006
(2006), Etude et diagnostic des pompes centrifuges 1eres Journées Nationales de l’Ingénierie Mécanique. Les 13 et 14 Juin. Constantine 2006
2005
(2005), Surveillance d’un ventilateur par analyse vibratoire Deuxième Séminaire National Sur la Maintenance Industrielle 29- 30 Novembre Souk-Ahras 2005
(2005), Etude de l’impact du filtrage sur la pollution d’un fluide hydraulique Deuxième Séminaire National Sur la Maintenance Industrielle 29- 30 Novembre Souk-Ahras 2005
(2005), Le diagnostic vibro-acoustique des turbomachines 1ere Journée Scientifique sur la Maintenance et Sécurité Industrielle 18/12/.2005 Skikda