Résumé: Abstract Purpose This study aims to develop an electrochemical sensor for the detection of benzophenone (BP) as an alternative to conventional techniques that are known, expensive, complex and less sensitive. Design/methodology/approach The developed sensor is a platinum electrode modified with a plasticized polymer film based on ß-cyclodextrin, using PVC as the polymer, PEG as the plasticizer and ß-CD as the ionophore. This sensor is characterized by various techniques, such as optical microscopy, scanning electron microscopy and cyclic voltammetry. This latter is also used for analyzing kinetic processes at the electrode/electrolyte interface and to evaluate the selectivity and sensitivity of the sensor. Findings The results highlight the performance of our sensor. In fact, it exhibits a linear response extending from 10−19 to 10−13 M, with a correlation coefficient of 0.9836. What is more, it has an excellent detection limit of 10−19 M and a good sensitivity of 21.24 µA/M. Originality/value The results of this investigation demonstrated that the developed sensor is an analytical tool of choice for the monitoring of BP in the aqueous phase. The suggested sensor is fast, simple, reproducible and inexpensive.

Résumé: The purpose of this paper is to study the immobilization of porcine pancreatic lipase (PPL), in an organic matrix by a covalent cross-linking method to sense propylparaben (PP) present in aqueous solution. PPL immobilization was performed by the covalent cross-linking method, using bovine serum albumin (BSA) in the presence of saturated glutaraldehyde vapor (GA). The preparation of the enzymatic membrane involves the incorporation of porcine pancreatic lipase (PPL), bovine serum albumin (BSA) and glycerol into a phosphate buffer solution (PBS). Characterization of this sensor was performed by impedance spectroscopy (EIS) and scanning electron microscope (SEM). The effect of experimental conditions such as PPL activity, potential, scan rate, PP concentration, pH and presence of interfering elements were studied by cyclic voltammetry. Under the optimal experimental conditions, a number of significant factors were optimized. The method exhibited good linearity in the range of 10–14 to 10–9 mol/L with a good correlation coefficient of 0.957, detection limit (LOD) of 3.66 × 10–15 mol/L and high sensitivity of 1.086 mA mol−1L. The authors also obtained a very good coverage rate of the surface equal to 91.44%, and hydrolytic activity of lipase is evaluated to 26.64 mmol min−1. The stability and the interference were also evaluated. The equivalent circuit used to explain the electrochemical behavior of modified electrode is a Randle circuit. The main application of biosensors is the detection of biomolecules that are either indicators of a disease. For example, electrochemical biosensing techniques can be used as clinical tools to detect breast tumors, because these compounds (PP) were found in breast tumors. The result registered in this paper indicates that the developed sensor is an efficient, fast, simple and inexpensive analytical tool that can be used for the analysis of water containing PP.